2012

REGENAUTO
Quick Reference
See also:
■ Control the Display of Polylines, Hatches, Gradient Fills, Lineweights, and
Text
Controls automatic regeneration of a drawing.
Access Methods
Command entry: 'regenauto for transparent use
List of Prompts
The following prompts are displayed.
Enter mode [ON/OFF] <current>: Enter on or off, or press Enter
On Regenerates the drawing immediately if any suppressed regenerations exist
in the queue and continues to regenerate automatically whenever you perform
an action that requires regeneration.
Off Inhibits regeneration of the drawing until you use the REGEN or
REGENALL command, or set REGENAUTO to on.
If you perform an action that requires a regeneration and that action is
irrevocable (such as thawing layers), the following message is displayed:
Regen queued
If you perform an action that requires a regeneration and that action is
revocable, the following message is displayed:
About to regen—proceed?
If you click OK, the drawing is regenerated. If you click Cancel, the last action
is cancelled and the drawing is not regenerated.
REGENAUTO | 1621