2012

Initially, the default base radius is not set to any value. During a drawing
session, the default value for the base radius is always the previously entered
base radius value for any solid primitive.
Use the Top Radius option to create a pyramid frustum.
List of Prompts
The following prompts are displayed.
Edge Specifies the length of one edge of the base of the pyramid; you pick
two points.
Specify first endpoint of edge: Specify a point
Specify second endpoint of edge: Specify a point
Sides Specifies the number of sides for the pyramid. You can enter a number
from 3 to 32.
Specify number of sides <default>: Specify a diameter or press Enter to specify the
default value
Initially, the number of sides for the pyramid is set to 4. During a drawing
session, the default value for the number of sides is always the previously
entered value for the number of sides.
Inscribed Specifies that the base of the pyramid is inscribed within (drawn
within) the base radius of the pyramid.
Circumscribed Specifies that the pyramid is circumscribed around (drawn
around) the base radius of the pyramid.
2Point Specifies that the height of the pyramid is the distance between two
specified points.
Specify first point: Specify a point
Specify second point: Specify a point
Axis Endpoint Specifies the endpoint location for the pyramid axis. This
endpoint is the top of the pyramid. The axis endpoint can be located anywhere
in 3D space. The axis endpoint defines the length and orientation of the
pyramid.
Specify axis endpoint: Specify a point
Top Radius Specifies the top radius of the pyramid, creating a pyramid
frustum.
Specify top radius: Enter a value
PYRAMID | 1579