2012

■ Draft Angle on page 113
Zebra Tab (Analysis Options Dialog Box)
Quick Reference
See also:
■ Analyze Surfaces
Changes the display settings for the ANALYSISZEBRA command.
List of Options
The following options are displayed.
Select Objects to Analyze
Prompts you to select the surface objects to analyze. When you are done
selecting objects, press Enter to return to the dialog box.
Stripe Display
Stripe Direction
Specifies the display angle. (
VSAZEBRADIRECTION on page 2615) This option
is only available when Type is set to Cylinder. If you are using the Chrome
Ball type, change the stripe directions with the
VSAZEBRADIRECTION on
page 2615 system variable.
Type
Sets analysis display type. (
VSAZEBRATYPE on page 2616)
Size
Sets the width of the zebra stripes. (VSAZEBRASIZE on page 2615)
Color 1
Sets the first color for zebra stripes. (
VSAZEBRACOLOR1 on page 2614)
Color 2
Sets the second color for zebra stripes. (VSAZEBRACOLOR2 on page 2614)
Analysis Options Dialog Box | 111