2012

in the current length unit corresponding to the current insertion units
controlled by the INSUNITS systems variable.
Resulting Intensity Specifies the type of light. Determines the distribution
of light from the lamp. The type of lighting can be changed after the light has
been added to the drawings.
■ Intensity Factor. Specifies the intensity factor.
■ Resulting Intensity. Displays the resulting intensity of a light as the product
of the Lamp Intensity value and the Intensity Factor. The value is read-only.
Lamp Color Dialog Box
Quick Reference
See also:
■ Control Light Properties
Provides settings for the lamp color.
Summary
Dialog box for setting the Lamp Color for a photometric light.
List of Options
The following options are displayed.
Color Type In photometric mode specifies lamp color either as a CIE standard
illuminant (D65 standard daylight) or as a Kelvin color temperature.
■ Standard Colors. Provides a fixed list of standard colors (spectra).
■ Kelvin Colors. Specifies a single temperature value for the color. (The color
corresponds to the glow of an ideal blackbody at that temperature.) Kelvin
temperature is a number in the range of 1000-20000.
Resulting Color Shows the result of modulating the lamp color by the Filter
color. A text field displays the RGB component values of the resulting color.
■ Filter Color. Provides a drop-down list for selecting a standard color or
launching a standard color selection dialog box.
Lighting Properties | 1557