2012

■ Project and trim a selected 3D solid or surface.
To trim the surface, set the
SURFACEAUTOTRIM on page 2559 system variable
to 1.
You can project any curve (line, arc, circle, ellipse, 2D polyline, 2D spline-fit
polyline, 2D curve-fit polyline, 3D polyline, 3D spline-fit polyline, spline, or
helix) onto any type of surface or solid.
List of Prompts
The following prompts are displayed.
Project to UCS Surface tab ➤ Project Geometry panel ➤ Project to UCS
Projects the geometry along the positive or negative Z axis of the current UCS.
Project to View Surface tab ➤ Project Geometry panel ➤ Project to View
Projects the geometry based on the current view.
Project to Two Points Surface tab ➤ Project Geometry panel ➤ Project to
Vector
Projects the geometry along a path between two points.
PROPERTIES
Quick Reference
See also:
■ Display and Change the Properties of Objects
Controls properties of existing objects.
1544 | Chapter 16 P Commands