2012

quarter as strong as at the point light; at a distance of 4 units, light is one
sixteenth as strong.
Use Limits Specifies whether to use limits or not.
Limits [oN/oFf] <Off>:
Attenuation Start Limit Specifies the point where light starts as an offset
from the center of the light. The default is 0.
Specify start limit offset <1.0000>:
Attenuation End Limit Specifies the point where light ends as an offset from
the center of the light. No light is cast beyond this point. Setting an end limit
increases performance where the effect of lighting is so minimal that the
calculations are wasted processing time.
Specify end limit offset <10.0000>:
Color/Filter Color
Controls the color of the light.
Enter true color (R,G,B) or enter an option [Index
color/Hsl/colorBook]<255,255,255>:
True Color Specifies a True Color. Enter in the format R,G,B (red, green, blue).
Index Specifies an ACI (AutoCAD Color Index) color.
Enter color name or number (1-255):
HSL Specifies an HSL (hue, saturation, luminance) color.
Enter HSL color (H,S,L) <0,0,100>:
Color Book Specifies a color from a color book.
Enter Color Book name:
Exit
Exits the command.
POLYGON
Quick Reference
See also:
■ Draw Rectangles and Polygons
POLYGON | 1533