2012

Opens the Select Point Cloud dialog box, a standard file selection dialog box
on page 1311.
Path Type
Full Path Uses the full path of the specified file, including the root folder and
all subfolders that contain the point cloud file.
Relative Path Uses the file path relative to the current drawing file to reference
the point cloud file. To use the relative path, the point cloud file must first
be saved.
No Path Uses only the file name of the point cloud file for referencing. The
file must be located in the same folder as the current drawing file.
Insertion Point
Specifies the insertion point (or base point) of the point cloud.
Scale
Specifies the scale for the inserted point cloud.
Specify On-Screen
Specifies the scale using the pointing device.
Rotation
Specifies the rotation angle for the inserted point cloud in the current UCS.
Specify On-Screen
Specifies the rotation angle using the pointing device.
Use Geographic Location
Inserts the point cloud based on the geographic data in the point cloud file
and the drawing file.
Lock Point Cloud
Controls whether an attached point cloud can be moved or rotated.
(POINTCLOUDLOCK on page 2475 system variable)
Attach Point Cloud Dialog Box | 1527