2012

NOTE Only the settings available for the configured device are displayed in the
tree view. In addition, you might not be able to edit some settings if the device
handles the setting through Custom Properties or doesn't support the capability.
List of Options
The following options are displayed.
Media Node
Specifies a paper source, size, type, and destination. Available settings depend
on the supported features of your configured plotter. For Windows system
printers, you must configure the media settings using the Custom Properties
node.
Source and Size
Specifies the paper source and size.
■ Source: Specifies the paper source; for example, sheet-fed or roll-fed. If you
specify a tray, you can select the type of tray.
■ Width: Specifies the width of the paper roll for a roll-fed source.
■ Automatic: Enables the printer to specify the appropriate paper source.
■ Size: Displays a list of available paper sources and both standard and custom
paper sizes.
■ Printable Bounds: Displays the print boundaries.
Media Type
Displays a list of the media types supported by the plotter configuration.
Duplex Printing
Determines double-sided printing and binding margin. Binding margin options
are available only for plotters that support duplex printing.
■ None: Indicates no double-sided printing.
■ Short Side: Places the binding margin on the short side of the paper.
■ Long Side: Places the binding margin on the long side of the paper.
Media Destination
Plotter Configuration Editor | 1511