2012

Summary
With the ADJUST command, you can control several display settings for
selected images and underlays (DWF, DWFx, PDF, and DGN underlays). To
confirm the settings, use the Properties palette.
List of Prompts
The following prompts are displayed.
The list of prompts depends on whether you select one or more images, or
one or more underlays.
Images
Fade Controls the fade effect in the image. Values range from 0 through 100.
The greater the value, the lighter that the image appears. This setting works
indirectly with the contrast effect; a higher contrast value blends the image
into the background when fade is set to a higher value.
Contrast Controls the contrast, and indirectly the fading effect in the image.
Values range from 0 through 100. The greater the value, the stronger the
contrast.
Brightness Controls the brightness, and indirectly, the contrast in the image.
Values range from 0 through 100. The greater the value, the brighter the image
and the more pixels that become white when you increase contrast.
Underlays
Fade Controls the fade effect in the underlay. Values range from 0 through
100. The greater the value, the lighter that the linework in the underlay
appears. This setting works indirectly with the contrast effect; a higher contrast
value blends the underlay into the background when fade is set to a higher
value.
Contrast Controls the contrast, and indirectly the fading effect in the underlay.
Values range from 0 through 100. The greater the value, the stronger the
contrast.
Monochrome Controls the color saturation of all areas while maintaining
the luminance. When turned on, the underlay appears in shades of gray
starting at black if the background color luminance is 50 percent or more. If
the background color luminance is less than 50 percent, then the colors are
inverted, with the darkest areas displaying as white, and the lightest areas
displaying as black.
ADJUST | 103