2012

Plots model space geometry first. Paper space geometry is usually plotted
before model space geometry.
Hide Paperspace Objects
Specifies whether the HIDE operation applies to objects in the paper space
viewport. This option is available only from a layout tab. The effect of this
setting is reflected in the plot preview, but not in the layout.
Plot Stamp On
Turns on plot stamping. Places a plot stamp on a specified corner of each
drawing and/or logs it to a file.
Plot stamp settings are specified in the
Plot Stamp dialog box, in which you
can specify the information that you want applied to the plot stamp, such as
drawing name, date and time, plot scale, and so on. To open the Plot Stamp
dialog box, select the Plot Stamp On option, and then click the Plot Stamp
Settings button that is displayed to the right of the option.
You can also open the Plot Stamp dialog box by clicking the Plot Stamp Settings
button on the Plot and Publish tab of the Options dialog box.
Plot Stamp Settings button
Displays the Plot Stamp dialog box when the Plot Stamp On option is selected
in the Plot dialog box.
Save Changes to Layout
Saves changes that you make in the Plot dialog box to the layout.
Drawing Orientation
Specifies the orientation of the drawing on the paper for plotters that support
landscape or portrait orientation. The paper icon represents the media
orientation of the selected paper. The letter icon represents the orientation of
the drawing on the page.
Portrait
Orients and plots the drawing so that the short edge of the paper represents
the top of the page.
Landscape
Orients and plots the drawing so that the long edge of the paper represents
the top of the page.
Plot Dialog Box | 1483