2012

width again. The starting and ending points of wide line segments are at the
center of the line.
Typically, the intersections of adjacent wide polyline segments are beveled.
No beveling is performed for nontangent arc segments or very acute angles
or when a dot-dash linetype is used.
PLOT
Quick Reference
See also:
■ Overview of Plotting
Plots a drawing to a plotter, printer, or file.
Access Methods
Button
Ribbon: Output tab ➤ Plot panel ➤ Plot
Menu: Application menu ➤ Print ➤ Plot
Menu: File ➤ Plot
Toolbar: Standard
Shortcut menu: Right-click the Model tab or a layout tab and click Plot
Summary
The Plot dialog box is displayed. Click OK to begin plotting with the current
settings.
If you enter -plot at the Command prompt,
options are displayed.
NOTE When Texture Compression is turned on, there is a reduction in the quality
of the images in the drawing when they are plotted. Texture Compression does
not affect viewports that are rendered. To identify if Texture Compression is
enabled, enter 3dconfig, and click Manual Tune. Look at the Hardware Effects
List in the Manual Performance Tuning dialog box.
PLOT | 1473