2012

Access Methods
Button
Ribbon: Home tab ➤ Modify panel ➤ Edit Polyline
Menu: Modify ➤ Object ➤ Polyline
Toolbar: Modify II
Shortcut menu: Select a polyline to edit. Right-click in the drawing area
and click Polyline Edit.
Summary
Common uses for PEDIT include joining 2D polylines, converting lines and
arcs into 2D polylines, and converting polylines into curves that approximate
B-splines (spline-fit polylines).
List of Prompts
The following prompts are displayed.
Select polyline or [
MULTIPLE]: Use an object selection method or enter m
The remaining prompts depend on whether you have selected a
2D polyline,
a
3D polyline, or 3D polygon mesh.
If the selected object is a line, arc, or a spline, the following prompt is
displayed:
Object selected is not a polyline.
Do you want it to turn into one? <Y>: Enter y or n, or press Enter
If you enter y, the object is converted into a single-segment 2D polyline that
you can edit. You can use this operation to join lines and arcs into a polyline.
Before the selected spline is converted to a polyline, the following prompt is
displayed:
Specify a precision <10>: Enter a new precision value or press Enter
The precision value determines how accurately the resulting polyline is to fit
to the source spline. Valid value is an integer between 0 and 99.
NOTE A high precision value may cause performance problems.
1448 | Chapter 16 P Commands