2012

Scale Factor Specifies the scale factor of the selected PDF underlay and the
scale factor units.
If INSUNITS is set to “unitless” or if the underlay does not contain resolution
information, the scale factor becomes the underlay width in AutoCAD units.
If INSUNITS has a value such as millimeters, centimeters, inches, or feet, and
the underlay has resolution information, the scale factor is applied after the
true width of the underlay in AutoCAD units is determined.
Rotation Specifies the rotation angle of the selected PDF underlay.
Attach PDF Underlay Dialog Box
Quick Reference
See also:
■ Attach Files as Underlays
Names, locates, and defines the insertion point, scale, and rotation of attached
PDF underlays.
List of Options
The following options are displayed.
Name
Identifies the PDF file you have selected to attach.
Browse
Opens the Select Reference File dialog (a
standard file selection dialog box on
page 1311).
Select one of more pages from the PDF file
Displays all of the pages that are found in the PDF file. If the PDF file only
contains a single page, that page is listed. You can select multiple pages by
holding Shift or Ctrl and selecting the pages to attach.
Path Type
Select the full (absolute) path, the relative path to the PDF file, or No Path,
and the name of the PDF file. For the No Path option, the PDF file must be
located in the same folder as the current drawing file.
1442 | Chapter 16 P Commands