2012

Index Status
Indicates whether the selected drawing file contains a spatial or layer index.
INDEXCTL controls whether layer and spatial indexes are saved with the
drawing file. A spatial index organizes objects based on their location in space.
A layer index organizes objects based on their layers.
-PARTIALOAD
Quick Reference
See also:
■ Open Part of a Large Drawing (Partial Load)
List of Prompts
The following prompts are displayed.
Specify
first corner on page 1430 or [View on page 1430]: Specify a point or enter v
First Corner
Specifies the first corner of a user-defined view.
Geometry from the defined view is loaded into the partially open drawing.
Layers to Load Loads geometry from the selected layers into the current
drawing, including both model space and paper space geometry. To load
geometry from multiple layers into the drawing, use a comma between layer
names. If no layer geometry is specified, no layer geometry is loaded into the
drawing, including geometry specified to load from a view.
Yes Does not load any external references into the drawing.
No Loads all external references into the drawing.
? Displays a list of layer names available in the current drawing. Enter one or
more layer names. If no layer geometry is specified, no layer geometry is loaded
into the drawing, including geometry specified to load from a view.
View
Loads the geometry from the specified view into the current drawing.
View:View to Load
Loads the geometry from the specified view into the partially open drawing.
1430 | Chapter 16 P Commands