2012

Table Of Contents

-PAN

Quick Reference

See also:

■ Pan or Zoom a View

Moves the view planar to the screen by specifying a distance and direction

the view should be moveed in.

List of Prompts

The following prompts are displayed.

Specify base point or displacement: Specify a point

You can specify a single point, indicating the relative displacement of the

drawing with respect to the current location, or (more commonly) you can

specify two points, in which case the displacement is computed from the first

point to the second point.

If you press Enter, the drawing is moved by the amount you specified in the

Specify Base Point or Displacement prompt. For example, if you specify 2,2

at the first prompt and press Enter at the second prompt, the drawing is moved

2 units in the X direction and 2 units in the Y direction. If you specify a point

at the Specify Second Point prompt, the location of the first point is moved

to the location of the second point.

You cannot use PAN transparently during VPOINT or DVIEW, or while another

ZOOM, PAN, or VIEW command is in progress.

Pan Shortcut Menu

Quick Reference