2012

Press Esc or Enter to exit, or right-click to display a shortcut menu.
If you enter -pan at the Command prompt, PAN displays
command prompts,
and you can specify a displacement to pan the drawing display.
Position the cursor at the start location and press the mouse button down.
Drag the cursor to the new location. You can also press the mouse scroll wheel
or middle button down and drag the cursor to pan.
Panning in Real Time
Quick Reference
See also:
■ Pan or Zoom a View
As a view is being panned, the cursor updates to let you know when you have
reached the extents of the drawing.
Summary
The cursor changes to a hand cursor. By holding down the pick button on
the pointing device, you lock the cursor to its current location relative to the
viewport coordinate system. The drawing display is moved in the same
direction as the cursor.
When you reach a logical extent (edge of the drawing space), a bar is displayed
on the hand cursor on that edge. Depending on whether the logical extent is
at the top, bottom, or side of the drawing, the bar is either horizontal (top or
bottom) or vertical (left or right side).
When you release the pick button, panning stops. You can release the pick
button, move the cursor to another location in the drawing, and then press
the pick button again to pan the display from that location.
To stop panning at any time, press Enter or Esc.
1414 | Chapter 16 P Commands