2012

Automatically calculates the X and Y offset values to center the plot on the
paper.
X
Specifies the plot origin in the X direction relative to the setting of the Plot
Offset Definition option.
Y
Specifies the plot origin in the Y direction relative to the setting of the Plot
Offset Definition option.
Plot ScaleScale
Controls the relative size of drawing units to plotted units.
NOTE If the Layout option is specified in Plot Area, the layout is plotted at 1:1
regardless of the setting specified in Scale.
Fit to Paper
Scales the plot to fit within the selected paper size and displays the custom
scale factor in the Scale, Inch =, and Units boxes.
Scale
Defines the exact scale for the output. Custom defines a user-defined scale. You
can create a custom scale by entering the number of inches (or millimeters)
equal to the number of drawing units.
NOTE You can modify the list of scales with SCALELISTEDIT.
Inch(es) =/mm =/Pixel(s) =
Specifies the number of inches, millimeters, or pixels equal to the specified
number of units.
Inch/mm/pixel
Specifies inches or mm for display of units. The default is based on the paper
size and changes each time a new paper size is selected.
Pixel is available only when a raster output is selected.
Unit
Specifies the number of units equal to the specified number of inches,
millimeters, or pixels.
Scale Lineweights
Page Setup Dialog Box | 1407