2012

The default view is Extents. Geometry that is common to both the selected
view and the layers is loaded into the drawing. You can load geometry from
only one view.
You can use the PARTIALOAD command to load additional geometry into a
partially open drawing.
NOTE When a drawing is partially open, named objects are still loaded into the
file along with the specified geometry from the selected view. All views are still
available in the partially open drawing, but only geometry from the view specified
to load is displayed in the drawing.
Layer Geometry to Load
Displays all the layers available in the selected drawing file. The geometry on
selected layers is loaded into the drawing, including both model space and
paper space geometry.
The default loads no layer geometry into the drawing, but you can load
geometry from one or more layers. If you specify to load no layer geometry
into the drawing, no geometry from the selected view is loaded either because
no layer geometry in that view or in the entire drawing is loaded.
Xref-dependent layers are displayed in the Layer Geometry to Load list only
if the selected drawing was last saved with theVISRETAIN system variable set
to 1. Any layers created in the xref since the xref was loaded into the selected
drawing are not displayed in the Layer Geometry to Load list.
You can use the PARTIALOAD command to load additional geometry into a
partially open drawing.
NOTE When a drawing is partially open, named objects are still loaded into the
file along with the specified geometry from the selected layers. All layers are still
available in the partially open drawing, but only geometry from the layers specified
to load appears in the drawing.
Layer Name Displays the layer names in the selected drawing.
Load Geometry Loads geometry from the layer when the drawing is opened.
Load All
Loads geometry from all layers when the drawing is opened. You can right-click
and use the shortcut menu to load geometry from all layers into the drawing.
Clear All
Loads no geometry from any layer when the drawing is opened. No geometry
at all is loaded, including geometry specified to load from a view. You can
right-click and use the shortcut menu to load no geometry into the drawing.
1324 | Chapter 15 O Commands