2012

Create
Creates viewports.
Delete Objects
Deletes existing viewports.
Create Viewports
Displays options for creating viewports.
Layout Number to Load Controls creation of viewports.
Entering 0 or pressing Enter creates no viewports.
Entering 1 creates a single viewport whose size is determined by the following
prompts.
Entering 2 creates four viewports by dividing a specified area into quadrants.
You are prompted for the area to be divided and the distance between the
viewports.
The viewing angle for each quadrant is set as shown in the table.
Standard engineering viewports
ViewQuadrant
Top (XY plane of UCS)Upper-left
SE isometric viewUpper-right
Front (XZ plane of UCS)Lower-left
Right side (YZ plane of UCS)Lower-right
Entering 3 defines a matrix of viewports along the X and Y axes. Specifying
points at the next two prompts defines the rectangular area of the drawing
that contains the viewport configuration. If you have inserted a title block,
the Specify First Corner prompt also includes an option for selecting a default
area.
If you enter more than one viewport in each direction, the following prompts
are displayed:
Specify distance between viewports in X direction <0.0>: Specify a distance
Specify distance between viewports in Y direction <0.0>: Specify a distance
The array of viewports is inserted into the defined area.
Redisplay Redisplays the list of viewport layout options.
MVSETUP on a Named Layout | 1267