2012

2P (diameter) Sets the diameter of the mesh cylinder base by specifying two
points:
■ First endpoint of diameter. Sets the first point on the diameter of the mesh
cylinder base.
■ Second endpoint of diameter. Sets the second point on the diameter of
the mesh cylinder base.
■
Height
■ 2Point (height)
■ Axis endpoint
2Point (height) Defines the height of the mesh cylinder by specifying the
distance between two points:
■ First point. Sets the first point of a two-point distance.
■ Second point. Sets the second point of a two-point distance.
Ttr (tangent, tangent, radius) Defines the base of the mesh cylinder with a
specified radius that is tangent to two objects. If the specified criteria can
produce multiple results, the closest tangent points are used.
■ Point on object for first tangent. Sets a point on an object to serve as the
first tangent point.
■ Point on object for second tangent. Sets a point on an object to serve as
the second tangent point.
■ Radius of circle. Sets the radius of the mesh cylinder base.
■
Height
■ 2Point (height)
■ Axis endpoint
Base Radius Sets the radius of the mesh cylinder base.
■
Height
■ 2Point (height)
■ Axis endpoint
MESH | 1133