2012

■ Center. Specifies the method for creating an elliptical mesh cone base that
starts with the center point of the base:
■ Center point. Sets the center of the mesh cone base.
■ Distance to first axis. Sets the radius of the first axis.
■ Endpoint of second axis. Sets the endpoint of the second axis.
Base radius Sets the radius of the mesh cone base.
■ Height
■ 2Point (height)
■ Axis endpoint
■ Top radius
Diameter Sets the diameter for the base of the cone.
■
Height
■ 2Point (height)
■ Axis endpoint
■ Top radius
Height Sets the height of the mesh cone along an axis that is perpendicular
to the plane of the base.
2Point (height) Defines the height of the mesh cone by specifying the distance
between two points:
■ First point. Sets the first point of a two-point distance.
■ Second point. Sets the second point of a two-point distance.
Axis endpoint Sets the location of the top point of the cone or the center of
the top face of a cone frustum. The orientation of the axis endpoint can be
anywhere in 3D space.
Top radius Specifies the top radius of the cone, creating a cone frustum.
■
Height
■ 2Point (height)
■ Axis endpoint
MESH | 1131