2012

2P (diameter) Defines the base diameter of the mesh cone based on two
points:
■ First endpoint of diameter. Sets the first location on the circumference of
the mesh cone base.
■ Second endpoint of diameter. Determines the general location and size
of the mesh cone base by setting the endpoint of the diameter.
■
Height
■ 2Point (height)
■ Axis endpoint
■ Top radius
Ttr (tangent, tangent, radius) Defines the base of the mesh cone with a
specified radius that is tangent to two objects:
■ Point on object for first tangent. Sets a point on an object to serve as the
first tangent point.
■ Point on object for second tangent. Sets a point on an object to serve as
the second tangent point.
■ Radius of circle. Sets the radius of the mesh cone base.
■
Height
■ 2Point (height)
■ Axis endpoint
■ Top radius
If the specified criteria can produce multiple results, the closest tangent
points are used.
Elliptical Specifies an elliptical base for the mesh cone.
■ Endpoint of first axis. Sets the start point for the first axis of the mesh cone
base and then specifies the other axis endpoints:
■ Other endpoint of first axis. Sets the first axis endpoint.
■ Endpoint of second axis. Sets the second axis endpoint
1130 | Chapter 13 M Commands