2012

First corner / Corner Sets the first corner of the mesh box.
■ Other corner. Sets the opposite corner of the mesh box.
■
Cube
■ Length
Center Sets the center of the mesh box.
■ Corner. Sets the opposite corner of the mesh box.
■
Cube
■ Length
Cube Sets all edges of the box to be of equal length.
■
Length
Length Sets the length of the mesh box along the X axis.
■
Width (not available for cubes)
Width Sets the width of the mesh box along the Y axis.
■
Height
■ 2Point (height)
Height Sets the height of the mesh box along the Z axis.
2Point (height) Sets the height based on the distance between two points:
■ First point. Sets the first point of a two-point distance.
■ Second point. Sets the second point of a two-point distance.
Cone
Creates a 3D mesh with a circular or elliptical base that tapers symmetrically
to a point or to a planar face.
1128 | Chapter 13 M Commands