2012

NOTE Before starting 3DORBIT, you can use the GRID command to set system
variables that control the grid display. The number of major grid lines
corresponds to the value you set using the Grid Spacing option of the GRID
command, which is stored in the GRIDUNIT system variable. Ten horizontal
lines and ten vertical lines are drawn between the major lines.
■ UCS Icon. Displays a shaded 3D UCS icon. Each axis is labeled X, Y, or Z.
The X axis is red, the Y axis is green, and the Z axis is blue.
3DORBITCTR
Quick Reference
See also:
■ Use 3D Navigation Tools
Sets the center of rotation in 3D Orbit view.
Summary
Starts 3D Orbit view and uses a center of rotation that you specify with your
pointing device. If you specify a point outside the current view, 3DORBITCTR
ignores the specified point and uses the default center of rotation.
3DORBITCTR overrides the AutoTarget option in the 3DORBIT command.
3DOSNAP
Quick Reference
See also:
■ Create Solids and Surfaces from Lines and Curves
■ Create Solids
■ Create Surfaces
■ Modify Surfaces
52 | Chapter 1 3D Commands