2011

the image has resolution information, the scale factor is applied after the true
width of the image in AutoCAD units is determined.
Specify On-screen
Allows you to input at the Command prompt or the pointing device. If Specify
On-Screen is cleared, enter a value for the scale factor. The default scale factor
is 1.
Scale Factor Field
Enter a value for the scale factor. The default scale factor is 1.
Rotation
Specifies the rotation angle of the selected image.
Specify on-screen
If Specify On-Screen is selected, you may wait until you exit the dialog box
to rotate the object with your pointing device or enter a rotation angle value
at the Command prompt.
Angle
If Specify On-Screen is cleared, enter the rotation angle value in the dialog
box. The default rotation angle is 0.
Show Details
Displays the image and DWG file paths.
Found In Displays the path where the image file is located.
Saved Path Displays the path that is saved with the drawing when the image
file is attached. The path is dependent upon the Path Type setting.
Image Ribbon Contextual tab
Quick Reference
See also:
■ Modify Raster Images and Image Boundaries
Image Ribbon Contextual tab | 933