2011

Grid Spacing (X) Sets the grid to the specified value. Entering x after the value
sets the grid spacing to the specified value multiplied by the snap interval.
On Turns on the grid using the current spacing.
Off Turns off the grid.
Snap Sets the grid spacing to the snap interval specified by the SNAP
command.
Major Specifies the frequency of major grid lines compared to minor grid
lines. Grid lines rather than grid dots are displayed in any visual style except
2D Wireframe. (GRIDMAJOR system variable)
Adaptive Controls the density of grid lines when zoomed in or out.
■ Adaptive Behavior. Limits the density of grid lines or dots when zoomed
out. This setting is also controlled by theGRIDDISPLAY system variable.
■ Allow Subdivision Below Grid Spacing. If turned on, generates additional,
more closely spaced grid lines or dots when zoomed in. The frequency of
these grid lines is determined by the frequency of the major grid lines.
Limits Displays the grid beyond the area specified by the LIMITS command.
Follow Changes the grid plane to follow the XY plane of the dynamic UCS.
This setting is also controlled by theGRIDDISPLAY system variable.
860 | Chapter 8 G Commands