2011

Table Of Contents

edit bar moving in the U direction on the left, and the V direction on the

right.

U Tangent Direction Moves the edit bar to the U axis to constrain the

tangency edit to that direction. In the image above, the image on the left

shows the edit bar moving in the U direction.

V Tangent Direction Moves the edit bar to the V axis to constrain the

tangency edit to that direction. In the image above, the image on the right

shows the edit bar moving in the V direction.

Normal Tangent Direction Moves the edit bar to edit the tangency of the

curve normal to the current UCS.

Set Constraint Sets whether the change in tangency or point location is

constrained to a specific axis.

■ X, Y or Z. Restricts the change to the designated axis.

■ XY, YX, or ZX. Restricts the change to a plane that is defined by the selected

axes.

Relocate Base Point Moves to a new location and add a new control vertex.

Align Gizmo With Sets the alignment for the change. Choices include

■ World UCS (default)

■ Current UCS

■ Face

3DFACE

Quick Reference