2011

Include Tangential Lines
Creates silhouette edges for curved surfaces.
Create
Creates the flattened view.
FREESPOT
Quick Reference
See also:
■ Use Spotlights
Creates free spotlight which is similar to a spotlight without a specified target.
List of Options
The following options are displayed.
Specify source location <0,0,0>: Enter coordinate values or use the pointing device
If the LIGHTINGUNITS system variable is set to 0, the following prompt is
displayed:
Enter an option to change
[
Name/Intensity/Status/Hotspot/Falloff/shadoW/Attenuation/Color/eXit]
<eXit>:
If the LIGHTINGUNITS system variable is set to 1 or 2, the following prompt
is displayed:
Enter an option to change [Name/Intensity
factor
/Photometry/Status/Hotspot/Falloff/shadoW/filterColor/eXit] <eXit>:
NOTE When the LIGHTINGUNITS system variable is set to 1 or 2, the Attenuation
option has no affect on the creation of the light. It is only maintained for scripting
compatibility.
Name
Specifies the name of the light. You can use uppercase and lowercase letters,
numbers, spaces, hyphens (-), and underscores (_) in the name. The maximum
length is 256 characters.
FREESPOT | 817