2011

Select Selects hidden edges of a partially visible 3D face and displays them.
If you want to make the edges of the 3D faces visible once again, use the Edge
option. You must select each edge with your pointing device to display it.
AutoSnap markers and Snaptips are automatically displayed, indicating the
apparent snap locations on each invisible edge.
EDGESURF
Quick Reference
See also:
■ Construct Meshes from Other Objects
Creates a mesh between four contiguous edges or curves.
Access Methods
Button
Ribbon: Mesh Modeling tab ➤ Primitives panel ➤ Modeling, Meshes, Edge
Surface
Menu: Draw ➤ Modeling ➤ Meshes ➤ Edge Mesh
Summary
Select four adjoining edges that define the mesh. The edges can be lines, arcs,
splines, or open polylines. The edges must touch at their endpoints to form
a single, closed loop.
EDGESURF | 723