2011

Table Of Contents

Turns on clipping and displays the DWF underlay clipped to the previously

defined boundary.

Off

Turns off clipping and displays the entire DWF or DWFx underlay and frame.

If you reclip the DWF or DWFx underlay while clipping is turned off, clipping

is automatically turned back on. You are prompted to delete the old boundary

even when clipping is turned off and the clipping boundary is not visible.

Delete

Removes a predefined clipping boundary and displays the full original

underlay.

New Boundary

Defines a rectangular or polygonal clipping boundary, or generates a polygonal

clipping boundary from a polyline.

Select Polyline Defines the boundary with the selected polyline. The polyline

can be open but must consist of straight line segments and cannot intersect

itself.

Polygonal Defines a polygonal clipping boundary with three or more points

that you specify for the vertices of a polygon.

Rectangular Defines a rectangular boundary with the points that you specify

for opposite corners.

Invert Clip Inverts the mode of the clipping boundary: objects are clipped

either outside the boundary or inside the boundary.

NOTE You can only create a new clipping boundary for a selected DWF underlay

when the old boundary is deleted.

DWFFORMAT

Quick Reference