2011

Back Moves the selected objects to the bottom of the order of objects in the
drawing.
When you change the draw order (display and plotting order) of multiple
objects, the relative draw order of the selected objects is maintained.
By default, when you create new objects from existing ones (for example,
FILLET or PEDIT), the new objects are assigned the draw order of the original
object you selected first. By default, while you edit an object (for example,
MOVE or STRETCH), the object is displayed on top of all objects in the drawing.
When you are finished editing, your drawing is partially regenerated so that
the object is displayed according to its correct draw order. This can result in
some edit operations taking slightly longer. You can use DRAWORDERCTL
to change the default draw order settings. TEXTTOFRONT changes the draw
order of all text and dimensions in the drawing.
DSETTINGS
Quick Reference
See also:
■ Use Precision Tools
Sets grid and snap, polar and object snap tracking, object snap modes, Dynamic
Input, and Quick Properties.
Access Methods
Menu: Tools ➤ Drafting Settings
Shortcut menu: Right-click Snap, Grid, Polar, Osnap, Otrack, Dyn or Quick
Properties on the status bar. Click Settings.
Summary
The
Drafting Settings dialog box is displayed.
DSETTINGS | 663