2011

Table Of Contents

Specify third point or [Continue] <C>: Specify a point on the object’s positive XY

plane, or press Enter to skip forward to specifying destination points

The third point fully specifies the orientation of the X and Y axes of the source

object that will be aligned with the destination plane.

Specify destination plane and orientation . . .

Specify first destination point: Specify a point

This point defines the destination of the base point of the source object.

Specify second source point or [eXit] <X>: Specify a point for the X axis of the

destination or press Enter

The second point specifies a new X axis direction for the destination within

a plane parallel to the XY plane of the current UCS. If you press Enter instead

of specifying a second point, the X and Y axes of the destination are assumed

to be parallel with the X and Y axes of the current UCS.

Specify third destination point or [eXit] <X>: Specify a point for the destination’s

positive XY plane, or press Enter

The third point fully specifies the orientation of the X and Y axes of the

destination plane.

NOTE If the destination is a plane on an existing solid object, you can define the

destination plane with a single point by turning on dynamic UCS.

3DARRAY

Quick Reference