2011

The label is displayed in the leftmost section of the inspection dimension
when the Label check box is selected.
Inspection Rate
Turns the display of the rate field on and off.
Inspection Rate Value
Specifies how frequently a part should be inspected.
The value is expressed as a percentage, and the valid range is 0 to 100. The
inspection rate is displayed in the rightmost section of the inspection
dimension when the Inspection Rate check box is selected.
-DIMINSPECT
Quick Reference
See also:
■ Inspection Dimension
List of Prompts
The following prompts are displayed.
Add inspection data or [Remove] <Add>: Enter an option or press Enter
Add
Adds an inspection dimension to the selected dimensions.
Round Creates a frame with semi-circles on the two ends; the fields within
the frame are separated by vertical lines.
Angular Creates a frame with lines that form a 90-degree angle on the two
ends; the fields within the frame are separated by vertical lines.
None Specifies that no frame is drawn around the values; the fields are not
separated by vertical lines.
None No label is displayed with the inspection dimension.
Remove
Removes the inspection dimension from the selected dimensions.
-DIMINSPECT | 595