2011

Scale Factor Field Enters a value for the scale factor. The default scale factor
is 1.
Rotation
Specifies the rotation angle of the selected DGN underlay.
Specify on-screen If Specify On-Screen is selected, you may wait until you
exit the dialog box to rotate the object with your pointing device or enter a
rotation angle value at the Command prompt.
Angle If Specify On-Screen is cleared, enter the rotation angle value in the
dialog box. The default rotation angle is 0.
Show Details
Displays the DGN file path.
Found In Displays the path where the DGN file is located.
Saved Path Displays the path that is saved with the drawing when the DGN
file is attached. The path is dependent upon the Path Type setting.
DGN Underlay Ribbon Contextual tab
Quick Reference
See also:
■ Work with Underlays
Change DGN underlay display, clip, layer, and osnap options.
Summary
When you select a DGN underlay in a drawing, the DGN Underlay Contextual
tab is displayed on the ribbon.
List of Options
The following options are displayed.
534 | Chapter 5 D Commands