2011

Table Of Contents

Width

Specifies the width of the box. Enter a distance or specify a point relative to

the corner point of the box.

Height Specifies the height of the box. Enter a distance or specify a point

relative to the corner point of the box.

Rotation Angle Rotates the box about the first corner specified. If you enter

0, the box remains orthogonal to the current X and Y axes.

Reference Aligns the box with other objects in the drawing or relative to an

angle you specify. The base point for the rotation is the first corner of the box.

■ Reference Angle:Defines a reference angle by specifying two points or an

angle from the X axis on the XY plane. For example, you can rotate the

4 | Chapter 1 3D Commands