2011

List of Options
The following options are displayed.
The Constraint Settings dialog box includes the following:
■
Geometric Tab
■ Dimensional Tab
■ Autoconstrain Tab
Geometric Tab
Controls the display of constraint types on constraint bars.
Infer Geometric Constraints Infers geometric constraints when creating and
editing geometry.
Constraint Bar Filters Controls the display of constraint bars or constraint
point markers for objects in the drawing editor.
For example, you can hide the display of constraint bars for Horizontal and
Vertical constraints.
Select All Selects the geometric constraint types.
Clear All Clears the selected geometric constraint types.
Only Display Constraint Bars for Object in the Current Plane Displays
constraint bars for geometrically constrained objects only on the current plane.
Constraint Bar Transparency Sets the transparency level of constraint bars
in a drawing.
Show Constraint Bars After Applying Constraints to Selected
Objects Displays relevant constraint bars after you apply a constraint manually
or when you use the
AUTOCONSTRAIN command.
Temporarily Display Constraint Bars When Objects Are
Selected Temporarily displays the constraint bars of the selected objects.
Dimensional Tab
Sets preferences in behavior when displaying dimensional constraints.
Dimensional Constraint Format Sets the display of the dimensional name
format and lock icon.
Dimension Name Format Specifies the format for the text displayed when
dimensional constraints are applied.
Constraint Settings Dialog Box | 353