2011

Changes the properties of an object.
List of Prompts
The following prompts are displayed.
Select objects:
Enter property to change [
Color on page 324/LAyer on page 324/LType on page
324/
ltScale on page 324/LWeight on page 324/Thickness on page 325/TRansparency
on page 325/Material on page 325/Annotative on page 325]:
NOTE The Plotstyle option is displayed only when you are using named plot styles.
If you select several objects with different values for the property you want
to change, varies is displayed as the current value.
Color
Changes the color of the selected objects.
For example, to change a color to red, enter red or 1. If you enter bylayer, the
object assumes the color of the layer on which it is located. If you enter
byblock, the object inherits the color of the block of which it is a component.
True Color Specifies a true color to be used for the selected object.
Color Book Specifies a color from a loaded color book to be used for the
selected object.
Layer
Changes the layer of the selected objects.
Ltype
Changes the linetype of the selected objects.
If the new linetype is not loaded, the program tries to load it from the standard
linetype library file, acad.lin. If this procedure fails, use LINETYPE to load the
linetype.
Ltscale
Changes the linetype scale factor of the selected objects.
Lweight
Changes the lineweight of the selected objects. Lineweight values are
predefined values. If you enter a value that is not a predefined value, the
closest predefined lineweight is assigned to the selected objects.
324 | Chapter 4 C Commands