2011

Linear
Button
Block Editor contextual tab ➤ Action Parameters panel ➤ Linear
Defines the distance between two key points in the block definition.
Specify Start Point/Endpoint Specifies the key points for the parameter in
the block definition.
Name
Name on page 263
Label
Label on page 264
Chain
Chain on page 264
Description
Description on page 264
Base Specifies the Base Location property for the parameter.
■ Startpoint. The start point of the parameter remains fixed when the
endpoint of the parameter is edited in the block reference.
■ Midpoint. The midpoint of the parameter remains fixed, and the start
point and endpoint of the parameter move simultaneously equal distances
from the midpoint.
Palette Palette on page 264
Value Set Limits the available values for the parameter to the values specified
in the set.
■ List. Specifies a list of available values for the parameter in a block reference.
■ Increment. Specifies a value increment and minimum and maximum values
for the parameter in the block reference.
Specify Label Location Specifies the location of the
parameter label on page
264 in the block definition.
Enter Number of Grips Determines the number of grips that will display in
the block reference.
■ 0. No grips will be displayed in the block reference. Rather, the selected
geometry can be edited in the Properties palette or a
lookup table on page
252.
BPARAMETER | 265