2011

The setting is stored as a bitcode using the sum of the following values:
Disables all Default, Edit, and Command mode shortcut
menus, restoring AutoCAD Release 14 behavior.
0
Enables Default mode shortcut menus.1
Enables Edit mode shortcut menus.2
Enables Command mode shortcut menus whenever a
command is active.
4
Enables Command mode shortcut menus only when
command options are currently available at the Command
prompt.
8
Enables display of a shortcut menu when the right button
on the pointing device is held down longer
16
SHOWHIST
Quick Reference
See also:
■ Display Original Forms of Composite Solids
IntegerType:
DrawingSaved in:
1Initial value:
Controls the Show History property for solids in a drawing.
Sets the Show History property to No (read-only) for all
solids. Overrides the individual Show History property
0
settings for solids. You cannot view the original objects
that were used to create the solid.
Does not override the individual Show History property
settings for solids.
1
2510 | Chapter 44 S System Variables