2011

DIMTIX
Quick Reference
See also:
■ Fit Dimension Text Within Extension Lines
SwitchType:
DrawingSaved in:
OffInitial value:
Draws text between extension lines.
Varies with the type of dimension. For linear and angular
dimensions, text is placed inside the extension lines if there
Off
is sufficient room. For radius and diameter dimensions
that don't fit inside the circle or arc, DIMTIX has no effect
and always forces the text outside the circle or arc.
Draws dimension text between the extension lines even
if it would ordinarily be placed outside those lines
On
DIMTM
Quick Reference
See also:
■ Display Lateral Tolerances
RealType:
DrawingSaved in:
0.0000Initial value:
Sets the minimum (or lower) tolerance limit for dimension text when DIMTOL
or DIMLIM is on.
DIMTM accepts signed values. If DIMTOL is on and DIMTP and DIMTM are
set to the same value, a tolerance value is drawn.
2256 | Chapter 31 D System Variables