2011

0Initial value:
Sets the fraction format when DIMLUNIT is set to 4 (Architectural) or 5
(Fractional).
Horizontal stacking0
Diagonal stacking1
Not stacked (for example, 1/2)2
DIMFXL
Quick Reference
See also:
■ Control Extension Lines
RealType:
DrawingSaved in:
1.0000Initial value:
Sets the total length of the extension lines starting from the dimension line
toward the dimension origin.
DIMFXLON
Quick Reference
See also:
■ Control Extension Lines
SwitchType:
DrawingSaved in:
OffInitial value:
Controls whether extension lines are set to a fixed length.
When DIMFXLON is on, extension lines are set to the length specified by
DIMFXL.
2240 | Chapter 31 D System Variables