2011

the absolute size of objects in the drawing. It changes only the magnification
of the view.
In a perspective view, ZOOM displays the 3DZOOM prompts.
NOTE You cannot use ZOOM transparently during VPOINT or DVIEW or while
ZOOM, PAN, or VIEW is in progress.
List of Prompts
The following prompts are displayed.
Specify corner of window, enter a scale factor (nX or nXP), or
[All on page 2128/Center/Dynamic/Extents on page
2129/
Previous/Scale/Window/Object] <real time.
All Zooms to display all visible objects and visual aids.
The model fills the window using the greater extents calculated by all visible
objects, or the extents of all visible objects and some visual aids. Visual aids
might be the model's grid, a gizmo, or other.
In the illustration, LIMITS is greater than the extents of the drawing.
Because it always regenerates the drawing, you cannot use ZOOM All
transparently.
Center Zooms to display a view defined by a center point and a magnification
value or a height. A smaller value for the height increases the magnification.
A larger value decreases the magnification.
2128 | Chapter 25 Z Commands