2011

Column Offset
Specifies the distance (in units) between columns. To add columns to the left,
specify a negative value. To specify column spacing with the pointing device,
use the Pick Both Offsets button or the Pick Column Offset button.
Angle of Array
Specifies the angle of rotation. This angle is normally 0, so the rows and
columns are orthogonal with respect to the X and Y drawing axes of the current
UCS. You can change the measurement conventions for angles using
UNITS
on page 2000. The ANGBASE on page 2150 and ANGDIR on page 2150 system
variables affect the angle of arrays.
Pick Both Offsets
Temporarily closes the Array dialog box so that you can use the pointing
device to set the row and column spacing by specifying two diagonal corners
of a rectangle.
Pick Row Offset
Temporarily closes the Array dialog box so that you can use the pointing
device to specify the distance between rows. ARRAY prompts you to specify
two points and uses the distance and direction between the points to specify
the value in Row Offset.
Pick Column Offset
Temporarily closes the Array dialog box so that you can use the pointing
device to specify the distance between columns. ARRAY prompts you to specify
two points and uses the distance and direction between the points to specify
the value in Column Offset.
Pick Angle of Array
Temporarily closes the Array dialog box so that you can specify the angle of
rotation by entering a value or using the pointing device to specify two points.
You can change the measurement conventions for angles using
UNITS on
page 2000. The
ANGBASE on page 2150 and ANGDIR on page 2150 system variables
affect the angle of arrays.
Polar Array
Creates an array by copying the selected objects around a specified center
point.
Array Dialog Box | 151