2011

Add Text Inserts a text entry box at the cursor location, where you can add
a label that helps organize palette contents.
Add Separator Adds a tool palette separator line at the location of the cursor.
All Palettes Displays all tool palette tabs in the palette window.
Allow Docking Toggles the ability to dock or anchor palette windows. A
docked window adheres to the side of the application window and causes the
drawing area to be resized. Selecting this option also makes Anchor Right and
Anchor Left available. Clear this option to undock a docked tool palette.
Anchor Left/ Anchor Right Attaches the palette to an anchor tab base at the
left or right side of the drawing area. An anchored palette rolls open and closed
as the cursor moves across it. When an anchored palette is open, its content
overlaps the drawing area. An anchored palette cannot be set to stay open.
Auto-hide A setting that causes a floating window to roll open and closed as
the cursor moves across it. When this option is cleared, the full tool palette
stays open continuously.
Close Closes the tool palette window.
Copy Copies the selected tool to the Clipboard.
Customize Commands Displays the
Customize User Interface Dialog Box.
Customize Palettes Displays the
Customize dialog box.
Cut Removes the selected tool from the tool palette and places it on the
Clipboard.
Delete Removes the selected tool from the tool palette.
Delete Palette Removes the current palette.
Dynamic Blocks Displays the palette tabs containing dynamic blocks.
Move Changes the cursor to a four-direction arrow.
Move Up Moves the selected tool palette up one position.
Move Down Moves the selected tool palette down one position.
New Palette Creates a new palette. Enter a name or press Enter to use the
default name.
Paste Pastes a tool from the Clipboard to the current tab.
Properties Displays the
Tool Properties dialog box, where you can change the
properties of the selected tool.
TOOLPALETTES | 1957