2011

Only the first and last points on a polyline are considered, and intermediate
vertices are ignored. The direction vector indicates the direction and length
of the shape to be extruded. The end selected on the polyline or line determines
the direction of the extrusion. The original path curve is drawn with wide
lines to help you visualize how the direction vector dictates the construction
of a tabulated mesh.
TARGETPOINT
Quick Reference
See also:
■ Use Point Lights
Creates a target point light.
List of Prompts
The following prompts are displayed.
Specify source location <0,0,0>: Enter coordinate values or use the pointing device
Specify target location <0,0,-10>: Enter coordinate values or use the pointing device
If the LIGHTINGUNITS system variable is set to 0, the following prompt is
displayed:
Enter an option to change [
Name on page 1929/Intensity on page 1929/Status on
page 1929/
shadoW on page 1930/Attenuation on page 1930/Color on page 1931/eXit
on page 1931] <eXit>:
If the LIGHTINGUNITS system variable is set to 1 or 2, the following prompt
is displayed:
1928 | Chapter 20 T Commands