2011

If you responded n to the previous prompt, respond to the following prompts:
Digitize lower-left corner of the Floating Screen pointing area: Digitize a point
Digitize upper-right corner of the Floating Screen pointing area: Digitize a point
Respond to the following prompt:
Would you also like to specify a button to toggle the Floating Screen Area?
[Yes/No] <N>: Enter y or n or press Enter
If you responded y to the previous prompt, respond to the following prompt:
Press any non-pick button on the digitizer puck that you wish to designate as
the toggle for the Floating Screen Area
TABSURF
Quick Reference
See also:
■ Construct Meshes from Other Objects
Creates a mesh from a line or curve that is swept along a straight path.
Access Methods
Button
Ribbon: Home tab ➤ 3D Modeling panel ➤ Tabulated Surface
Menu: Draw ➤ Modeling ➤ Meshes ➤ Tabulated Mesh
Summary
Select a line, arc, circle, ellipse, or polyline to sweep in a straight path. Then
select a line or polyline to determine the first and last points of a vector that
indicates the direction and length of the polygon mesh.
1926 | Chapter 20 T Commands