2011

Cfg
Designates or realigns the tablet menu areas or designates a small portion of
a large tablet as a screen pointing area.
If tablet menus are in use and the same number of menus is selected, the
following prompts are displayed:
Do you want to realign tablet menus? [Yes/No] <N>: Enter y or n or press Enter
Digitize upper-left corner of menu area n: Digitize a point (1)
Digitize lower-left corner of menu area n: Digitize a point (2)
Digitize lower-right corner of menu area n: Digitize a point (3)
In the prompt, n is the menu number (1-4).
The printed menu form must be affixed to the tablet surface, and the requested
points must be digitized. The set of three points must form a 90-degree angle.
Tablet menu areas can be skewed at any angle.
After all interaction concerning tablet menus is complete, the following prompt
is displayed:
Do you want to respecify the screen pointing area? [Yes/No] <N>: Enter y or n
or press Enter
If you enter y, the following prompts are displayed:
Digitize lower-left corner of the pointing area: Digitize a point
Digitize upper-right corner of the pointing area: Digitize a point
A small portion of the tablet's surface is designated as the fixed screen pointing
area.
Do you want to specify the Floating Screen Pointing area? [Yes/No] <N>: Enter
y or n or press Enter
If you responded y to the previous prompt, respond to the following prompt:
Do you want the Floating Screen Area to be the same size as the Fixed Screen
Pointing Area? [Yes/No] <Y>: Enter y or n or press Enter
TABLET | 1925