2011

0.0 sets the Text Height (Non annotative), entering a height greater than 0.0
sets the Paper Text Height (Annotative), for this style.
Width Factor Entering a value less than 1.0 condenses the text. Entering a
value greater than 1.0 expands it.
Obliquing Angle Entering a value between -85 and 85 obliques the text.
Vertical Vertical is available only if the selected font supports dual orientation.
?—List Text Styles Lists the text styles available in the drawing.
At the Enter Text Style(s) to List prompt, entering the name of a style displays
the name, font file, height, width factor, obliquing angle, and generation of
the style and exits the command. Entering an asterisk (*) or pressing Enter
displays the height, width factor, obliquing angle, and generation (whether
text is drawn backwards, upside-down, vertically, or normally) of each style,
and then exits the command.
STYLESMANAGER
Quick Reference
See also:
■ Manage Plot Style Tables
Displays the Plot Style Manager, where you can revise plot style tables.
Access Methods
Button
Menu: Application menu ➤ Print ➤ Manage Plot Styles
Summary
In the folder, you can start the Add-a-Plot-Style-Table wizard, or double-click
an STB or CTB file to open the Plot Style Table Editor.
■ Double-click the Add-a-Plot-Style-Table wizard to add plot style tables.
STYLESMANAGER | 1859