2011

Thickness Sets the current 3D thickness.
(THICKNESS system variable)
Fill, Grid, Ortho, Qtext, Snap, Tablet Shows whether these modes are on or
off.
Object Snap Modes Lists the running object snap modes specified by OSNAP.
Free Dwg Disk Space Lists the amount of disk space available on the drive
specified for this program's temporary files.
Free Temp Disk Space Lists the amount of disk space available on the drive
specified for temporary files.
Free Physical Memory Lists the amount of installed memory free on your
system.
Free Swap File Space Lists the amount of free space in your swap file.
STLOUT
Quick Reference
See also:
■ Export Stereolithography STL Files
Stores solids in an ASCII or binary file.
Summary
The FACETRES system variable determines how the solid is triangulated. A
higher value creates a finer mesh that more accurately represents the model.
This also results in a much larger file.
Select solids or watertight meshes
You can select blocks or external references (xrefs) that contain solids or
watertight meshes. Only solids and watertight meshes of the selected blocks
of xrefs are included in the STL file. All other geometry is discarded.
Create a binary STL file? [Yes/No] <Yes>: To create a STL file, enter y or press
Enter. To create an ASCII file, enter n
The
Create STL File Dialog Box displays.
1850 | Chapter 19 S Commands