2011

Retains the angle of the edge and allows you to make modifications and
extensions, and create new geometry based on the extracted edge.
Provides a method for making modifications, extensions, and new 3D solids
based on the extracted edge.
■ Select Edges (copy)
■ Undo
■ Remove
Select Edges (copy) Specifies the edges to copy. Press Ctrl+click to select the
edge. Then set the displacement:
■ Base point of displacement. Sets the first point for determining where the
new object is placed.
■ Second point of displacement. Sets the relative direction and distance for
the new object.
Undo Cancels selection of the edges you added most recently to the selection
set. The previous prompt is displayed. If all edges have been removed, the
following prompt is displayed:
Remove Removes previously selected edges from the selection set. The prompt
is redisplayed.
■ Remove edges. Removes the edges you select from the current selection
set.
■ Undo
■ Add
Add Adds edges to the selection set.
■ Select Edges (copy)
■ Undo
■ Remove
Edge: Color
Changes the color of individual edges on a 3D solid object.
■ Select edges (color)
■ Undo
1806 | Chapter 19 S Commands